Portable podcasting kit. Requires a laptop or external recorder.
Audio-Technica AT2035 Studio Microphone Pack with ATH-M20x (x2) , Focusrite Scarlet 2i2, Boom & XLR Cable (x2)
Audio-Technica At2035 Cardioid Condenser Microphone Specs
Microphone
Capsule: Condenser
Polar Pattern: Cardioid
Pad: -10 dB
High-Pass Filter: 80 Hz, 12 dB/Octave
Performance
Frequency Range: 20 Hz to 20 kHz
Maximum SPL: 148 dB SPL
Impedance: 120 Ohms
Sensitivity: 22.4 mV/Pa
Dynamic Range: 136 dB
Signal-to-Noise Ratio: 80 dB
Equivalent Noise Level: 12 dB
THD: 1%
Connectivity
Output Connectors: 1 x XLR 3-Pin
Power
Operating Voltage: 11 to 52 V
Operating Current Consumption: 3.8 µA
Physical
Dimensions: ø: 2.05 x L: 6.69" / ø: 52 x L: 169.93 mm
Weight: 14.22 oz / 403 g (each)
Audio-Technica Ath-M20X Monitor Headphones (Black) Specs
Headphone
Driver Size: 1.6" / 40 mm
Magnet Type: Neodymium
Voice Coil: Copper-Clad Aluminum Wire
Design: Over-Ear (Circumaural)
Earcup Style: Closed-Back
General
Frequency Response: 15 Hz to 20 kHz
Sensitivity: 96 dB
Impedance: 47 Ohms
Maximum Power Handling: 700 mW
Focusrite 2i2 Specs
Interface
Channels of I/O Analog:
2 Inputs / 2 Outputs at 192 kHz
Max Sample Rate/Resolution 192 kHz / 24-Bit
Display and Indicators 2 x LEDs (Input Level)
1 x LED (+48V)
2 x LEDs (Input Selection)
1 x LED (Host Connection)
1 x LED (Monitoring Mode)
Connectivity
Host Connection 1 x USB Type-C (USB 2.0)
Analog I/O 2 x Combo XLR-1/4" TRS Balanced/Unbalanced Mic/Line/Hi-Z Input
2 x 1/4" TRS Balanced Monitor Output
1 x 1/4" TRS Unbalanced Headphone Output
Phantom Power +48 V (Applied to All Inputs)
Digital I/O None
MIDI I/O None
Memory Card Slot None
Digital Audio
Sample Rates Up to 192 kHz (AD/DA Conversion)
Bit Depth Up to 24-Bit (AD/DA Conversion)
Sync Sources Internal
Compatibility
OS Compatibility macOS
Windows
Required Hardware Available USB 2.0 Port
USB Cable (Included)
Internet Connection Required for Software/Driver Download
Power
Power Requirements USB Bus-Power