75mm fluid head.
3/8" Baseplate Screw is Located on the underside of the head.
Keep track of the baseplate locking pin when removing.
Removal may be necessary for use with cameras with quick a release plate and the Canon C300.
Our other tripods can be found here.
Head Specs:
- Load Capacity: 16.5 lbs (7.5kg)
- Diameter/Thread: 75mm 3/8" Half Ball
- Counter Balance System: 4 Step
- Counter Balance Range: 0 lb (0 kg), 5.5 lb (2.5 kg), 11 lb (5.0 kg), 16.5 lb (7.5 kg)
- Quick Release/Wedge Plate: Yes
- Balance Plate: Sliding, 1/4" and 3/8" Screws
- Tilt Drag: Continuous
- Tilt Range: -60 / +90
- Tilt Lock: Independent
- Spring Loaded Counter Balance: Continuous
- Pan Range: 360
- Pan Drag: Continuous
- Pan Lock: Independent
- Leveling Bubble/Illuminated: Yes/Yes
- Temperature Range: -4 to 140F (-20 to 60C)
- Height: 6.1" (15.5cm)
- Weight 6.39 lbs (2.9kg)
Leg Specs:
- Maximum Height: 67.32"
- Supports Up to: 44 lb
- Minimum Height: 10.63"
- Folds Down to: 28.94"
- Weighs: 5 lb
- 3 Sections
- Leg Angles: 23, 50, 70