- These M-Audio speakers provide professional grade sound quality for studio monitoring.
Specs:
- Low-Frequency Driver: 4" diameter, polypropylene-coated, magnetically shielded with high-temperature voice coil
- High-Frequency Driver: 1" diameter, magnetically shielded silk cone tweeter
- Frequency Response: 85 Hz, 20 kHz
- Crossover Frequency: 2.7 kHz
- RMS SPL: 101.5 dB @ 1 meter
- Signal-To-Noise Ratio: > 90 dB (typical, A-weighted)
- Input Connectors: Left and right RCA line input, left and right 1/4" TRS input, and 1/8" aux input
- Polarity: Positive signal at "+" input produces outward low-frequency cone displacement
- Dynamic Power: 20 watts continuous, per channel into 4
- Input Impedance: 10 k unbalanced, 20 k balanced
- Input Sensitivity: 100 mV pink noise input produces 90 dBA output SPL at 1 meter with volume control at maximum
- Protection: RF interference, output current limiting, over temperature, turn on/off transient, subsonic filter
- indicator: blue power LED ring around volume knob on front panel
- Power Requirements: 100-120V/~50/60 Hz, 220-240V/~50/60 Hz; powered via attached 2-conductor line cord
Our Mackie speaker set can be found here
Our audio cables can be found here